orbi login banner

Orbilogin.com

Orbilogin is also mentioned as orbilogin.com. Orbi Login allows you to reach the Orbi router and configure it as you have required it. Have you heard of the Orbi WiFi Mesh system which allows you to easily set up the connection between Orbi Satellite and  Orbi Router? You could change the password of the Orbi router anytime using the Orbi App. There is a great feature in Orbi router’s which allows you to sync Orbi Router and Orbi Satellites with push-button on it. Orbilogin website also allows you to reset the old password with a new one in case you have forgotten it. To change the password of the Orbi router you have to settings up Orbi Router RBR50.

Orbi Router Setup is performed when the device is connected with an active internet connection and the same network. You could use a LAN cable. The LAN cable is also known as Ethernet cable. The second option is to use a WiFi connection to connect the Orbi router with the same network. You could damage almost any Orbi router device using the website www.orbilogin.com but make sure you have to open this website from the same device. Once you are on the login page of the Orbi router it would ask for the username and password. If you are using Orbi App on your phone then you can skip the username and password just by scanning the QR code on the screen.

How to Setup Orbi Router Manually?

  • The first step is to verify that is orbi router is connected with an active internet connection. Please make sure you have an active internet connection to Nighthawk-app.com make this setup successful.
  • Once an internet connection is confirmed, connect your orbi router with the modem using an ethernet cable.
  • Connect your computer or PC with orbi router.
  • Now, switch on both Orbi router and your modem.
  • Open any web browser and go to orbilogin.com
  • Now, click the Enter button.
  • This action will redirect you to Orbi router Login page screen.
  • Now you have to put in the default username and password to make the login into the router successful.
  • At last, you can to click on Login button to make the login successful.
Orbi Setup using Manual Method

How to open Orbilogin.com for Orbi RBR50?

I hope you are able to access www.orbilogin.com or www.orbilogin.net. If not then I suggest you perform the following troubleshooting steps given below:

  1. The first and most important step is to make sure that Netgear Orbi RBR50 is connected with the power supply and must be switched on. You can check the status of when the Orbi router shows LED lights.
  2. Now the second step is to check and make sure that all the devices are connected with the Orbi Router using a wired or wireless connection. I mean to say using Ethernet cable and WiFi connection. To log in to the Orbi router, the default and login details like username and password are mentioned at the backside of the Netgear Orbi router.
  3. If you are still not able to access the Orbi router using step 2 then I suggest you try using the default IP address HTTP://192.168.1.1 or Http://10.0.0.1
  4. If you have replaced the address of the Orbi router for security concerns then you have to use that same address to access the router.
  5. In case you are getting any issue with the connection of the Orbi router then I suggest you to try the wired method using the Ethernet cable instead of WiFi.
  6. Make sure that the modem is connected to the internet port on your Orbi router. Check the connections are stable enough to transfer the data from the modem to the Orbi router.
  7. If you are still facing the same issue then I suggest you change the web browser and try to open the same address in a different browser. Some of the most popular web browsers are Google Chrome, Firefox, Opera, etc.
  8. You could also try to change the device and connect different one,s for example, a laptop or desktop.
  9. There is one more troubleshooting step and that is to reboot your current device and try again.
  10. The last but not the least option is to reset your Orbi router to default settings. This term is known as factory reset.
Orbi Setup using Wizard method

How to Setup Orbi Router through Wizard Method?

  • Launch any web browser on your computer.
  • Visit this URL: orbilogin.com
  • Put valid username and password to Download Nighthawk App for Computer login to orbi router.
  • Once you make a successful login, the basic home page will load in your web browser tab.
  • Now, click on the advanced tab and then select the setup wizard.
  • Final step: tick the Yes option and click on next.

How to Change the Orbi Admin Login Password

Just follow the steps given below to change Orbi Router’s Admin Login Password:

  1. The first step is to open a web browser in your connected device like; laptop or computer.
  2. Then you have to open the web address or simply click on this link; HTTP://orbilogin.com
  3. Now the other windows open. On this page, you have to enter the username and password and click on the login button.
  4. If the username and password are correct then you are able to login into the Orbi router.
  5. Now go to BASIC Home page displays.
  6. Now further you have to go to Advanced > Administration > Set Password. Now set the password on the display page.

Netgear Orbi Login | Orbi Login

Here you will find steps to login into your Orbi router using Orbi app and Orbi website. These steps will guide you step by step to make successfully log into your Orbi router for setup.

Using Web Interface

  • You need to visit the official Orbi website
  • Go to orbilogin.com
  • Log in using a valid username and password
  • If you are not able to log in using username and password then you first have to reset the login credentials.
  • Click on login button
  • Now you are logged into Orbi router’s web interface
Netgear Orbi Login

How to connect Orbi Router with Access Point?

In case you want to use your Orbi router as an Access Point then you could do it on your own. You just have to follow the simple and easy steps given below. To configure the Orbi router as an access point and it will connect to the next modem automatically.

The following steps will guide to setup Orbi router as an access point:

  1. Now the first step is to connect an Ethernet cable to connect the internet port of your Netgear Orbi router.
  2. The second step is to open the web browser on the device which is connected with Orbi Network.
  3. Now enter and you would see the login page.
  4. Now on the login page enter the username and password. The basic home page displays. But still, let me share with you the default username and password. The default username is admin and enters password is the same that you have set.
  5. Make sure that the password is case-sensitive.
  6. Once you are able to login into the admin page now go to Advanced Tab> router A/P mode. You could select the option between router/access mode.
  7. Now select the access point radio button and click on Apply.
Netgear Orbi Login Using Orbi App

Using the Orbi App

  • First, you have to download the Netgear orbi app on your Android / iPhone from the app store.
  • Download and Install the app
  • Once installed, tap the app to open it
  • Enter Orbi admin login credentials
  • Tap on Sign in
  • And follow the instructions to access the router settings

How to connect Orbi Router and Orbi Satellite?

The following are the steps to set up Orbi Router and Orbi Satellite: 

  1. The most important and first step is to remove the modem from the power source. Remove the battery and any power backup attached to the Orbi router.
  2. Now connect your modem to the yellow color port of your router using a wired connection through an Ethernet. cable.
  3. Connect the Orbi router to the power supply and check for the lights on it.
  4. Once done, now you have to wait for some time until the lights on the Orbi router turn to white.
  5. Place the Orbi Satellite at the location which is the center of your house and all possible locations are visible from the router.
  6. There are several lights that mean something. Le me share what they means.
  7. Router: Amber light means the connection between Orbi router and Orbi Satellite is stable and good. If you move your Orbi router closer to the orbi satellite it will improve the speed of the data transfer and internet speed of packets.
  8. When the Orbi Satellite is successfully connected with Orbi router RBR50.
  9. To Download the Orbi app or visit HTTP://orbilogin.com is to set up your Orbi WiFi network.

Why is my orbilogin.com not working?

Are your orbilogin.com not working? If yes, then proceed with the given simple troubleshooting steps to solve this issue.

  • In the first step, check that your Netgear Orbi router plugged into an electric supply.
  • Next, check that your router should turn on. In case it is not, then turn it on.
  • Sometimes, the Orbi router web address does not work, then use 
  • the IP address of the Orbi router.
  • Try to login with another internet browser.
  • Clear all the cache, history, and cookies of the internet browser, after that, try to log in.
  • In case you are trying multiple connections to log in at the same time, then you need to use only a wired connection.
  • Make sure your modem is correctly connected to the internet port of the router.
  • Power cycle your Orbi network and restart all the connected devices.
  • And, last option is left when all the above steps failed you have to reset your Netgear Orbi router.

How to setup Orbi router and Orbi Satellite?

The factory builds new Netgear routers are set with default username and password to access the router admin panel. Orbi router and Orbi satellite both are easy to setup. Follow the below-given steps.

orbilogin.com not working

Not able to connect to the internet with Orbilogin.com

The following steps will help you fix the internet issue when you are not able to connect with Orbilogin.com

  1. The first and most important thing is that you need to connect your WiFi-enabled computer or laptop with the Orbi network.
  2. In case you are already connected to Orbi but not able to use the internet then I recommend you reboot your and then again then if the internet is working on not.
  3. Now once able to connect and the IP address or the URL of the Orbi router and enter the username and password.
  4. If you are successfully able to log into the router then you have to go to advanced settings.
  5. Click on the Advanced setting, The home page displays.
  6. In case your internet service provider not able to recognize the Orbi router then you must enforce the your modem to restart and try again.
  7. If you are still facing the same issue then please check it might require the login program. You need to confirm your internet service provider’s PPP connection.
  8. Now contact your ISP and inform them about the new network and ask them to use Router’s MAC address to recognize. 

How to Setup Orbi router and Orbi Satellite

setup Orbi router and Orbi Satellite
  • Unplug your existing home modem from the power socket.
  • Now you have to plug the modem back into the electric supply and turn it on.
  • connect your modem to the Orbi router’s Internet port using Ethernet cable.
  • Turn on your Orbi router and wait till the LEDs light flashing solid white color. And then Pulse white.
  • Further, place your Orbi satellite nearby Orbi router, then connect it to the electric outlet.
  • Wait until the LED light of the satellite turns solid color and then pulse white to pulse magenta.
  • After the satellite LED pulse magenta, then the Orbi satellite will light up in the following colors for 10 seconds then turns off.
  • Solid blue: It indicates that the connection between the Orbi router and satellite is good.
  • Solid Magenta: It means your Orbi satellite not connected to the Orbi router. So place the Orbi satellite near the router.
  • Solid Amber: This means the connection between the router and the satellite is fair.
  • Lastly, connect your computer or PC to the Orbi router and satellite whether through a wired or wireless connection.

How to change orbilogin.com router default password?

To improve the security of your newly bought router you need to change the factory-set login credentials for the router. Just follow the below-given steps and set a new username and password for router admin login.

  • Open this website orbilogin.com on the computer which is already connected with the concerned router.
  • Now, you would see the login page asking for login credentials. Put default username and password and login into the admin page of the router.
  • Once successfully logged in go to Advanced Tab and select Administration settings.
  • Now got to set a password and enter the new password would you like too. Please make sure the new password of at least 8-10 alphanumeric characters which includes special characters like @# etc.
  • Once done, click on “Apply”.
change orbilogin.com router default password

How to recover my Orbi router password?

Follow the below-given steps to recover the forgotten Orbi router password. These are simple steps to execute and recover the set password.

Orbi Router Default Password
  • Open any specific web browser and visit Orbilogin.com
  • Once the login page is loaded you would find the “cancel” option on the page. Click on that.
  • It will prompt to provide the Orbi serial number if any password recovery is enabled.
  • You would find the serial number on the backside of the Orbi router, please check and put the same.
  • Click on “continue” and a recovered password window will open.
  • Now click on the login option.
  • Log in to your router using the recovered password.

Change your Netgear Orbi router to Access Point Mode

The following steps will guide you to change your Orbi router into an Access point. Please follow the steps given and do not skip any.

  • First, you need to connect your current device like a computer or laptop with an Orbi router.
  • Now, use any specific web browser and visit www.orbilogin.com
  • Once logged in with correct credentials, go to Advanced> Advanced Setup> AP mode.
  • Click on “AP Mode”
  • Now click on “Apply”
Change your Netgear Orbi router to Access Point (AP) Mode

Check the new Firmware Update on your Orbi Router

Firmware is the set of protocols by which a particular device works in certain situations. The following steps will guide you to check and update the latest update.

Check the New Firmware Update
  • First, you have to connect your device like your mobile or laptop to the Orbi router’s WiFi network.
  • Now, open a web browser and visit orbilogin.com
  • Sign in to the router’s admin page correct username and password and click on the “Sign In” button.
  • On the top left corner, you will find the menu. Click on the menu icon
  • Now select router settings under the Settings tab.
  • Scroll down the open page to check for the updates option.
  • If you have any pending updates for your Orbi router then your notification will show you on the page.
  • Now, just proceed with the instructions given and download the latest Orbi router firmware.

How to update Firmware of the Orbi router?

We always keep the router updated with the latest firmware versions as they include terminated loopholes, few features, leveled up security algorithms. New and latest Orbi firmware overall enhance the performance of the router. To check and update whether your router is running on the latest firmware you need to follow the following steps that guide you with the process.

  • First of all, you need to connect your device like a computer, laptop with the Orbi router’s network.
  • Now go to the play store and download the latest firmware.
  • Download the latest available firmware for Orbi’s router.
  • On your computer/laptop, launch a web browser and go to Http://orbilogin.com
  • Put default username and password to log into the router.
  • Once able to log in then go to Administration> Advanced> Firmware update.
  • Now upload the new firmware and let it complete the process
  • Once done, you are good to go.
firmware update orbi router

Update Firmware of your Obri Satellite?

Unable to log in to my Orbi Satellite

Follow the below-given steps to update the firmware of the Orbi Satellite

  • First, you have to download the Orbi Satellite’s latest firmware.
  • You could easily download that from Netgear Center and it’s free to download and use.
  • Now you have to launch the web browser and go to Orbilogin.com
  • Log in to Orbi Satellite’s admin page using the correct username and password.
  • You have to opt for the manual option from the web page.
  • Now, on the Orbi Satellite screen, you will see to upload option.
  • Upload the latest download firmware and let it install and complete the process.
  • Once done with the installation you are good to go.